Frac Tank
Mobile storage with solid construction.
Durability Comes Standard.
Whether you’re storing water, oil, chemicals, sludge or other liquids or solids, a Roll Offs USA Frac Tank is your solution. Our heavy gauge steel tanks are available with outside or inside manifolds and are fully coated with a chemical-resistant liner. We manufacture these tanks in-house and don’t skimp on construction. Goose bracing, a 22″ manway, floor frame mill channel runners, and a 4″ rear drain are all standard.
Description
Offering both outside and inside manifold frac tanks we have what you are looking for. Ours come standard with goose bracing, 22″ manway, floor frame mill channel runners, and a 4″ rear drain. These tanks are steel grit blasted and painted to your specifications. They are made here in house and can handle your needs.
Features
Roll Offs USA Model 500- Barrel Corrugated Wall, Mobile Storage Tanks come equipped with:
- New Running Gear
- 10 Mil. DFT Chemical Resistant Liner
- ¼” Heavy-Duty Steel Walls
Every Rolls Offs USA Frac Tank is steel-grit blasted and painted to your specifications.
Specifications
| Level Gauging | Tank Pressure/Vacuum Relief Vent |
| Hydrotesting | Full Capacity Static Test |
| Finish | Per Customer Specifications |
| Access | Front Stairway |
| Pick Up | Standard 5th Wheel King Pin |
| Manway | 22″ Manway On Front And Side, (2) Non-Sealed Hatched On Roof |
| Welds | Continuous Except Substructure Cross-members |
| Axle | 25,000 lb. Axle With Air Brakes, 11.00 X 22.5 Bias Tires On Steel Disc Wheel |
| Floor | ¼” PL, V-Bottom With Mill Side And Inner Channels |
| Dimension | 45′ 8″ Long, 8′ 5 ½” Wide, 9′ 8 ½” High; 500 Barrel Capacity |
| Floor Support | 12″ And 10″ Channel Longitudinal Runners
¼” PL Channel And Angle Cross-members |
| Walls | ¼” PL Solid Welded, Corrugated Steel, Corrugation 15″ On Center |
| Roof | 3/16″ PL Solid Weld With Channel Support Outside Or Corrugated |
| Front/Rear | ¼” Pl Solid Welded, Corrugated Steel |
| Drain/Fill | 4″ Floor Drain At Rear End, 3″ Fill Pipe To Roof At Rear, 4″ Suction Line Connection At Front, 8″ Flanged Front Manifold Connecting With Turn Down Tail Shaft To Floor Slump |
Drawings
Brochures
